Installation guide
ENECTOR AC 3.7/11 wallbox
The guide covers the following:
- wiring and installation of the ENECTOR wallbox (with KOSTAL Smart Energy Meter as an option)
- DIP switch settings in the wallbox
- If necessary, the settings for the ENECTOR wallbox in the KOSTAL Smart Energy Meter
- Potential errors and solutions
WARNING
This installation guide is provided for informational purposes only and does not replace the operating instructions and manuals required for proper assembly and installation.
Whenever working on the device or feed cables, the entire house grid must be switched to a completely voltage-free state. Consult the relevant operating manuals for the devices in question for more details.
We accept no liability for the content of the manual. The conditions pertinent to our products apply.
Observe the safety notices in the operating manual for the devices.
Only a trained and qualified electrician may perform installation and commissioning.
Operating manual required to install the ENECTOR AC 3.7/11 wallbox
You will find the manual in the download area for the product or by clicking on the following link:
https://www.kostal-solar-electric.com//ba_wallbox_enector-ac-3_7-11-de
