ENECTOR with KSEM without PV system
1-phase or 3-phase connection with convenience functions
1 | KOSTAL wallbox (slave) |
2 | KOSTAL Smart Energy Meter (master) with activation code (for data transfer to the KOSTAL Solar Portal) |
The wallbox can be connected to the house grid as a 1-phase or 3-phase system. The wallbox (slave) is controlled by the KSEM (master) via Modbus RTU.
INFO
In order for the wallbox to be set up in the KOSTAL Smart Energy Meter (KSEM), this function must first be activated via an activation code in the KSEM.
The activation code can be purchased from the KOSTAL Solar online shop.
To access the shop, go to shop.kostal-solar-electric.com.
Functions:
Modes can be selected via KSEM Webserver, KOSTAL Solar App or optional push-button.
- Lock Mode (lock wallbox, cannot be selected via optional push-button)
- Power Mode (simple charging)
1-phase at 1.4 - 3.7 kW / 230 V
3-phase at 3.7 - 11 kW / 400 V - Solar Plus Mode
The mode is only used here to set the charging power to a fixed value (e.g. 50 % of the vehicle's max. charging power). - Blackout protection (house connection monitoring)
INFO
Here, the KOSTAL Smart Energy Meter monitors the amount drawn from the grid. If the grid demand exceeds the maximum current (e.g. 63 A per phase) configured in the wallbox, the charging power of the wallbox is reduced to remain below the maximum house connection capacity.
- Data transfer of the wallbox charging data to the KOSTAL Solar Portal via the KSEM