Activating data transfer to the KOSTAL Solar Portal
Activate data transfer to the KOSTAL Solar Portal.
To do this, the following steps are necessary:
PLENTICORE:
- Open the inverter user interface
- Start your internet browser.
- Enter the IP address of the inverter in the address bar of the browser and confirm with Return. The IP address can be found in the inverter menu.
- The web server will open.
- To log in, click on Login and log in as the system operator.
- The web server menus will open.
- Make settings
After logging in, you can now configure the required settings via the web server on the inverter.
- Open the Settings > Solar Portal page.
- ActivateUse Portal.
- Select the KOSTAL Solar Portal under Portal.
- Click on Save.
- Data transfer to the KOSTAL Solar Portal is now active.
Registration in the portal can take up to 20 minutes.