Settings menu
If you are logged in to the PIKO CI as the installer, you can configure the inverter by going to Settings.
This menu item can be used to retrieve inverter data and configure the inverter.
Basic settings
Set the general parameters of the inverter.
Communication settings
Set the inverter's network communication parameters. (e.g. Ethernet (LAN)/WLAN/WiFi/RS485 settings)
Inverter settings
The menu items can be used to set the parameters in the inverter which are specified by the grid operator. Parameters may only be changed on the inverter by qualified electricians who are familiar with the system and at the request of the grid operator
Other settings
Activate arc detection.
Power adaptation/control
Configuring power adaptation/control.
- Active power
- Reactive power
- KSEM management: Configure KSEM settings.
- Ripple control receiver (RCR): Configuration
- Park controller
Maintenance settings
This menu item can be used to reset the inverter to factory settings or to export or import inverter configuration data.
User management
This menu item can be used to change the installer's log-in password.
The default password is superadmin.