KSEM with PLENTICORE and ENECTOR AC 3.7/11 wallbox

In conjunction with a PLENTICORE or PLENTICORE BI, the following settings can be used to ensure that wallbox charging is given priority over charging a house battery.

This requires the following settings:

Add all inverters as described under Multiple-inverter connection via IP address by going to Inverter > Devices . If using an inverter with battery, ensure the correct category (photovoltaic with battery).
Add ENECTOR wallbox as described via activation code in KSEM.

If you are using a PLENTICORE with battery and an ENECTOR, the power curtailment (no zero feed-in) can be configured in the inverter.
If you have more than one inverter in the system (e.g. a PLENTICORE with battery and a PLENTICORE as PV inverter), set up power curtailment in the KSEM (multiple-inverter connection) and be aware of the changes to the settling time.