Power Mode (simple charging)

In Power Mode, the electric vehicle is charged at the maximum charging power. This depends on how the wallbox is connected (single-phase or 3-phase), what maximum charging power has been set in the wallbox, the choice of phase usage and what charging power the electric vehicle allows.

The maximum charging power that the wallbox is to provide is set via DIP switches in the wallbox.

For vehicles that can only be charged 1-phase, the maximum charging power is 3.7 kW.

For vehicles that can be charged 3-phase, the maximum charging power is 11 kW.

Usage of house battery in Power Mode

INFO

This function is only available with PLENTICORE G3 inverter software 03.06.00 and higher.

If there is a battery in the house network, this will also be used to charge the electric vehicle as standard.

Use house battery: In this case, the house battery is also used to charge the electric vehicle This means that in Power Mode, the battery is used first to charge the electric vehicle until the battery reaches its min. SOC. Only then is the vehicle charged from the grid.

Do not use house battery: In this case, the house battery is prevented from being used to charge the electric vehicle. The electric vehicle is only charged from the public grid and PV surplus.