Adding wallbox charging device

If there is not yet a charging device present, the first charging device can be set up in the KOSTAL Smart Energy Meter via Add.

  1. Click on the Addbutton.
  2. Give the charging device a name.
  3. Select the RS485 interface on the KOSTAL Smart Energy Meter where the wallbox is connected to the KSEM (RS485 B is the default here).

  4. INFO

    Info

    Note that the RS485 interface must be enabled in the Modbus settings beforehand.

  5. Assign an address (default value 50, no change is necessary).
  6. Click on the OKbutton.
  1. The charging device has been added.