Functions of the reset button

Restarting KOSTAL Smart Energy Meter

Press and hold the RESET button for more than 6 seconds with a sharp object.

The device will then start.

Resetting the online interface password

Press the reset button as follows:

• once for a lengthy period (between 3 and 5 seconds) and then
• once briefly (half a second).

The gap between the two should be no more than one second. If the command was detected correctly, the status LED flashes orange twice. The online interface password is reset to what it was upon delivery (see type plate on device).

IMPORTANT INFORMATION

To log in, you will need the password from the energy meter’s type plate, which can be found on the separate instruction leaflet in the packaging.

Resetting the network settings

Press the reset button as follows:

• once briefly (half a second) and then
• once for a lengthy period (between 3 and 5 seconds).

The gap between the two should be no more than one second. If the command was detected correctly, the status LED flashes orange twice. One result of resetting the network settings is that the DHCP is activated.

Resetting KOSTAL Smart Energy Meter to state in which it was delivered

Call up the Webserver. The device is reset by going to Device settings > Device > Reset device to state in which it was delivered and clicking on Reset.

IMPORTANT INFORMATION

After resetting, the default password applies again. To log in again, you will need the password from the energy meter’s type plate, which can be found on a separate instruction leaflet in the packaging.