Communication via LAN

Connecting inverter to LAN/Ethernet cable

INFO

Info

Use an Ethernet cable of category 7 (Cat 7, FTP) with a maximum length of 100 m as a network cable (Ethernet 10BaseT, 10/100 MBit/s).

  1. Guide the Ethernet cable through the LAN cover provided.
  2. Connect Ethernet cable to one of the LAN sockets.
    The second LAN socket is used to continue the network connection to further inverters.
  3. Tighten LAN cover to the specified tightening torque.
    Tightening torque: 3 Nm.
  4. Connect LAN/Ethernet cable to the computer or router.

  1. INFO

    Info

    After commissioning, the settings for the Ethernet connection can still be configured in the KOSTAL PIKO CI Conf App.

    This includes, for example, the setting for IP mode, in which acquisition of an automatic IP address can be set.

  2. LAN cable connected