KSEM management
Configure the power limitation using the KOSTAL Smart Energy Meter here.
Parameter | Explanation |
|---|---|
Activate/deactivate KSEM | Activate: No energy meter connected to the inverter. Deactivate: A KOSTAL Smart Energy Meter is connected to the inverter. |
Connection between KSEM and master inverter | LAN: The KOSTAL Smart Energy Meter is connected to the inverter by LAN connection. RS485: The KOSTAL Smart Energy Meter is connected to the inverter by RS485 connection. |
Sensor position | Installation position of energy meter KOSTAL Smart Energy Meter (grid connection point or consumer). This should be established at the grid connection point by default. |
Modbus address of energy meter | Energy meter Modbus address |
Limitation of the active power to (W) | Enter the power limitation here. |
IP address of energy meter | Energy meter IP address |
L1-3 grid power | Displays the grid power at the individual phases |
Total energy | Shows the energy supply from the public grid |
Total feed-in energy | Shows the feed-in into the public grid |
L1-3 consumer power | Shows the consumer power at the individual phases |
Total consumption | Shows the total consumption |
L1-3 inverter output | Shows the inverter output at on the individual phases |
Total inverter output | Shows the total energy generated by the inverter |