Connecting PV modules to the inverter
The DC cables of the solar modules must not be connected to the inverter under load.
DANGER

Risk of death due to electrical shock and discharge!
Switch off the inverter on both the AC and DC sides.
- Unlock the AC connection of the inverter by switching off the line circuit breaker.
- Turn the DC switch on the inverter to “OFF”.
- Before connecting, check polarity of DC cables.
INFO
Observe national regulations! In France, in particular, the inverter and the supply lines must be labelled, for example.
The installer is responsible for obtaining and affixing the prescribed markings.
- Remove protective caps from input terminals.
INFO
Keep the protective caps of the PV connections for future use.
- Fit plug connectors of the individual PV strings into the DC inputs PV+ and PV- in pairs until they engage tangibly and audibly.
- The PV modules are connected.