Selecting the installation site

IMPORTANT INFORMATION

notice

Loss of warranty due to incorrect installation

Observe these instructions when selecting the installation site. Failure to observe these instructions may limit guarantee claims or render them fully null and void.

Be absolutely sure to maintain the clearance around the inverter in order that the inverter remains cool.
To mount the inverter, use the wall mount and fastening screws that are suitable for the substrate.

	Install the inverter indoors.
	Install the inverter in a protected outdoor area.
	Protect the inverter from direct precipitation.
	Protect the inverter from coarse soiling, e.g. leaves.
	Protect the inverter against dust, contamination and ammonia gases. Rooms and areas containing livestock are not permitted as installation sites.
	Do not install the inverter in potentially explosive areas.
	The ambient temperature must be between -25 °C and +60 °C.
	The air humidity may be between 0% and 100% (condensing).
	Inverter may only be installed up to an altitude of 4000 m.
	A sufficient safety distance from flammable materials and potentially explosive areas in the vicinity must be ensured.
	Mount inverter on a stable installation surface that can safely bear the weight. Plasterboard walls and wood planking are not permitted.
	Do not install the inverter on a flammable installation surface. WARNING! Risk of burns from hot parts on the inverter! Some of the inverter components can reach temperatures of over 80 °C during operation. Select the installation site in accordance with the information provided in these instructions. Always keep the ventilation openings clear.
	Install the inverter vertically. Tilted position up to 15° is permitted.
	Maintain minimum distances and the necessary clearance.
	The inverter makes noise during operation. Install inverter in such a way that people are not disturbed by operation noises.
	The inverter must be easily accessible and the status LED must be easy to read.
	Install the inverter out of reach of children or other unauthorised persons.
	Lay cables with UV protection or use UV-resistant cables.