Replacing PV fuses
The PV fuses in the PIKO CI 50/60 can be replaced. If an event prompting this is displayed, the inverter must be disconnected from the grid on the DC and AC sides.
PIKO CI 50/60 inverter: PV fuses
1 | PV fuses |
- De-energise inverter on AC and DC sides (De-energising the inverter).
DANGER
Risk of death due to electrical shock and discharge!
Life-threatening voltages are present in the inverter.
- Only a qualified electrician may open and perform work on the device.
- Disconnect all poles of the device before starting work.
- Wait at least 10 minutes after disconnecting the device until the internal capacitors have discharged.
- Wait at least 10 minutes after the inverter has been switched off.
- Open the lower section of the inverter.
- Use a multimeter to identify and replace defective fuses.
- Install cover and screw it tight (3 Nm).
- Switch on the inverter again.
- The PV fuses have been replaced.