Active power control
If the energy supply company only permits a certain active power input to the public power grid, the values can be specified here. If the specified limit values are exceeded, the inverter's PV generation is reduced.
Parameter | Explanation |
|---|---|
P(U) regulation | Parameter of the P(U) curve, which reduces the active power if the output voltage exceeds a certain value |
P(F) regulation | Parameter of the P(f) curve, which decreases the active power during overfrequency or increases the active power during underfrequency |
P(f) function: Increased output at underfrequency (LFSM-U) | Activate P(f) function takes effect in the event of underfrequency when the active power generation needs to be increased quickly. |
Power gradient (%/s) | Set the power gradient. The power gradient indicates how quickly the power is to be increased or decreased. |
Maximum feed-in capacity (W) | Set the inverter's maximum active power |
Maximum active power (%) | Setting for maximum output power of the inverter |