Initial commissioning
The display or the inverter's Webserver can be used for initial commissioning. The required activation codes are requested during initial commissioning.
Initial commissioning via display
The inverter display is used to carry out initial commissioning. Here, the data is entered on the inverter.
Initial commissioning via Webserver
The inverter's integrated Webserver is used to carry out initial commissioning. An additional device, e.g. a PC or smartphone that accesses the Webserver, is required to enter the data.
To do this, the user must first select and set up the network connection via the inverter display before a connection is made via the input device.
Possible connection types are:
- Wifi access point: After switching on the inverter, it provides a Wifi access point. A connection to the inverter's Wifi access point can be established using a smartphone. The access data for this is shown as a QR code on the inverter's display.
- LAN: The inverter is connected to the local network via a LAN connection. The Webserver can then be accessed via a LAN-enabled device.
After selecting the connection method, the inverter's website is accessed and initial commissioning can be carried out.