Configuring settings in the Webserver

After the initial installation, more settings can be made using the inverter’s menu or more conveniently via the Webserver.

To do this, use a PC or tablet to log in on the Webserver as an installer. Initial commissioning is completed.

INFO

Parameters governed by the grid, limitations and guidelines can only be modified with a service code.

To log in as an installer, you need the master key from the inverter's type plate and your service code, which can be requested from our service team.

Information about our service team can be found on our website at www.kostal-solar-electric.com > Service and support.

The following settings still need to be configured after initial commissioning:

• Inverter settings made by the installer
• Mandatory settings for grid feed-in defined by energy supply company.
• Registration for KOSTAL Solar Portal, if not already done.
• With a battery connected, select the battery type and configure the battery.
• Make further settings, such as changing the password or updating the inverter software.