Logging in to the Webserver

Launch an Internet browser.

  1. Enter the inverter's IP address in the browser's address bar and confirm with ENTER.

  2. INFO

    Info

    The IP address is shown alternately in the inverter display or can be queried in the inverter menu.

  3. The Webserver is called up.
  4. As the plant owner, log in with your password.

    If you want to log in as an installer, enter the following data:
    Master key: Master key from the type plate
    Service code: Installer service code
    Confirm the danger notice and disclaimer.

  1. IMPORTANT INFORMATION

    notice

    To log in for the first time as the plant owner, you first have to have a password. You can get one by selecting Forgotten password . In the following menu, enter the master key and a new password. You will find the master key on the inverter's type plate.

    The password must comprise at least 8 characters and include the following characters: a-z, A-Z, 0-9

    Should you forget your password, it can be re-assigned in the same way.

  2. The Webserver's menu opens.

Configuring settings in the Webserver

After logging in, the required settings can be implemented on the inverter via the Webserver or the inverter's values can be queried.