Webserver menu – Info

Displays all events and version numbers of the inverter.

 

Shows information about the versions installed on the inverter. Information about the device can also be viewed without logging in to the Webserver.

Parameter

Explanation

Name of device

Name of inverter. Can be changed by going to Settings > Basic settings.

Serial number

Inverter serial number

Article number

Article number of the inverter

SW

Software version (SW)

MC version

Main controller software version

IOC version

I/O controller software version

HW version

Hardware version

Country setting

Shows the inverter's country setting

Battery input

Status of DC input 3 battery

 

Provides information about the assigned network settings.

LAN parameter

Explanation

Network information

Static

The network settings have been assigned manually.

DHCP

The network settings have been obtained automatically.

IPv4 address

Shows the specified IP address of the inverter

Subnet mask

Shows the specified subnet address

Gateway

Shows the router/gateway address

DNS server

Shows the address of the 1st and 2nd DNS server (Dynamic Name Server)

MAC address

Shows the physical address of the network interface

 

WLAN parameter

Explanation

Network configuration

Wifi off

The inverter's Wifi interface is deactivated.

Access point

The inverter offers a Wifi access point.

Client

The inverter is a Wifi client and can connect to a Wifi gateway in the local home network.

Network information

Static

The network settings have been assigned manually.

DHCP

The network settings have been obtained automatically.

IPv4 address

Shows the specified IP address of the inverter

Subnet mask

Shows the specified subnet address

Gateway

Shows the router/gateway address

DNS server

Shows the address of the 1st and 2nd DNS server (Dynamic Name Server)

MAC address

Shows the physical address of the network interface

 

Solar portal parameters

Explanation

Last connection to the solar portal

Last transfer in minutes or time

 

Up to 10 events can be displayed. Additional information about the event can be displayed via Info (i) next to the event.