Selecting the installation site
Observe these instructions when selecting the installation site so that you select the correct one.
| Protect inverter against exposure to direct sunlight. |
| Protect inverter from rain and splash water. |
| Protect inverter from falling parts which could enter the inverter's ventilation openings. |
| Protect the inverter against dust, contamination and ammonia gases. Rooms and areas containing livestock are not permitted as installation sites. |
| Mount inverter on a stable installation surface that can safely bear the weight. Plasterboard walls and wood planking are not permitted. |
| Mount inverter on a non-flammable installation surface.
|
| A sufficient safety distance from flammable materials and potentially explosive areas in the vicinity must be ensured. |
| Inverters can cause noise when in operation. Install inverter in a way that prevents people from being disturbed by operation noises. |
| Mount inverters on vertical installation surfaces. |
| Maintain minimum distances and the necessary clearance. |
| Inverter may only be installed up to an altitude of 2000 m. |
| The ambient temperature must be between -20 °C and +60 °C. |
| The air humidity must be between 4 % and 100 % (condensing). |
| Install inverters so that they are not accessible to children. |
| Inverters must be easily accessible and the display clearly legible. |