Overview of Smart Communication Board
The Smart Communication Board (SCB) is the communication and interface centre. All the connections for communicating with other components can be found on the SCB.
|
Item |
Designation |
Terminal |
Pin |
Explanation |
|---|---|---|---|---|
|
1 |
Not used |
X603 |
|
- |
|
2 |
Digital switched outputs |
X1401 |
1–2 |
Potential-free switched outputs OUT 1 (NO or NC contact) |
|
3–4 |
Potential-free switched outputs OUT 2 (NO or NC contact) | |||
|
3 |
Digital switched outputs |
X1402 |
5–6 |
Potential-free switched outputs OUT 3 (NO or NC contact) |
|
7–8 |
Potential-free switched outputs OUT 4 (NO or NC contact) | |||
4 | Digital interface terminal for ripple control receiver/external battery control | X401 | 1 | REF (+12 to 14 V supply voltage) |
2 | Input 1 | |||
3 | Input 2 | |||
4 | Input 3 | |||
5 | Input 4 | |||
6 | COM (0 V ground) | |||
|
5 |
Terminal for ripple control receiver CEI for Italy |
X403 |
1 |
common ref connection |
|
2 |
commando locale connection | |||
|
3 |
signale esterno connection | |||
6 | Battery communication terminal | X601 | 1 | VDD (+12 to 14 V supply voltage) |
2 | CANopen High interface (data +) | |||
3 | CANopen Low interface (data -) | |||
4 | RS485 interface B | |||
5 | RS485 interface A | |||
6 | GND (0 V ground) | |||
7 | Connection PIN 1-4 and PIN 5-6 | X402 | 1 | IN1 monitor input for backup switch |
2 | IN2 monitor input for backup switch | |||
3 | Relay monitor input for backup switch | |||
4 | GND (0 V ground) | |||
5 | PLC monitor | |||
6 | GND (0 V ground) | |||
|
8 |
Terminal for energy meter (Modbus RTU) |
X452 |
1 |
Interface A RS485/Modbus RTU |
|
2 |
Interface B RS485/Modbus RTU | |||
|
3 |
GND | |||
9 | USB 2.0 interface | X171 | 1 | USB 2.0 max. 500 mA (for service purposes) |
10 | Ethernet connection (RJ45) | X207 | 1 | RJ45 max. 100 Mbit (LAN connection for connection to a router or other devices, e.g. inverter, KSEM) |
11 | X206 | 1 |