Basic settings
Set the general parameters of the inverter.
Parameter | Explanation |
---|---|
Inverter name | Input for inverter name (max. 63 characters). The following characters are permitted: a–z, A–Z, 0–9 and "-". Spaces or special characters are not possible. Following the name change the browser connection to the Webserver can be established with the new name or can continue using the IP address. |
Time setting
Set time/date or select a time server.
Parameter | Explanation |
---|---|
Use time server (NTP) | Activate/deactivate a time server (NTP server). After activation, the time from the time server is used. By using the NTP server, the switch between summer and winter time is also performed automatically. |
Date | Date entry. The time can be taken from the PC. |
Time | Time entry. The time can be taken from the PC. |
NTP server | Input for IP address or name of NTP server (Network Time Protocol). Other, alternative NTP servers can be added via Plus (+). There are numerous free NTP servers on the network which can be used here. |
Time zone | Setting the time zone |
Change password
Change Webserver password.
Parameter | Explanation |
---|---|
Change password | Change Webserver password. The password must comprise at least 8 characters and include the following characters: |