Solar portal

Use Portal

Enables transmission to the Solar Portal.

Portal

Selection of the KOSTAL Solar Portal or other portals.

If you select Other portals, you must enter a portal code and confirm by clicking Apply.

Last transmission

Shows when the inverter last transmitted data to the Solar Portal (provided the function is active).

Last successful transmission

Shows when the inverter last successfully transmitted data to the Solar Portal (provided the function is active).

Remote access

Remote access to the inverter must be enabled to allow support in the event of faults or for remote configuration. Support staff or an installer can then access the device via the KOSTAL Solar Portal and resolve issues remotely.

Inactive: Remote access is disabled (default setting)

Active: Remote access is enabled.

Enable for 24 hours: Remote access is enabled for this period and then automatically disabled.

Enable permanently: Remote access is enabled permanently. Access can be disabled again via the ‘Disable’ option.

Enable log data export with FTP push

If ‘Use portal’ is enabled and the KOSTAL Solar Portal has been selected, the log data can be transferred to and stored on an external FTP server. A description of the data can be found at Log file: Entries.

To do this, enable log data export and configure the FTP push settings.

Server: Enter the server address where the FTP server can be reached.

Port: Enter the port address (default value is 21).

Directory: Specify the directory in which the files are to be stored on the server.

Export interval: Select the time interval for the transfer.

Use encryption: Use encryption for data transfer. This requires the server to support encryption.

Authentication required: If access to the server requires a username and password, enter the relevant details here.

Connection status: Displays the current connection status to the server.

Last successful export: Time of the last successful data transfer.