Setup wizard via the KOSTAL Solar App

INFO

Info

If a message appears saying that the inverter's WLAN is not connected to the Internet and mobile data should be used instead, remain connected to the inverter's WLAN.

  1. Press the right arrow key.
  2. If you are not automatically logged in, log in to the inverter as an installer using the master key and service code. You will find the master key on the inverter's type plate.
  3. Under operating mode, select which components should be taken into consideration during the initial setup (PV generators, installed energy meter, connected battery, a KOSTAL BackUp Switch or an automatic backup box). The following items are then taken into consideration during the initial installation.

  4. INFO

    Info

    Activation codes purchased and received in advance via the KOSTAL Solar App are automatically transferred to the inverter and can be used during the initial setup.

  5. Follow the instructions of the initial installation wizard.
  6. Save each page using the Save button.
  7. Press the right arrow key to move to the next page.
  8. Setup completed.
  10. Finally, you can change the network settings, download the parameterisation report and, if necessary, start the grid and system protection self-test.
  1. The inverter has been set up and is ready for operation.