Switching on the inverter

  1. Activate supply voltage via the line circuit breaker.
  2. If present, switch on the battery storage unit using the battery switch. For more information about operation, refer to the operating manual for the battery storage system.
  3. The battery storage unit starts up.
  4. If external DC voltage separators are present, activate the DC strings consecutively.
  5. Move the DC switch on the inverter to the ON position.
  6. The inverter starts up.
  7. During start-up, the LEDs in the control panel of the inverter light up briefly.
  8. The screensaver appears on the display and shows the device type. The screensaver is deactivated when a key is pressed twice.
    When no key has been pressed for several minutes, the screensaver with the image of the inverter appears automatically on the display.
  1. The inverter is in operation.