Activate receipt of control signals for active power control
If a ripple control receiver is already connected to another KOSTAL solar inverter in your house network, you can use the control signals of this ripple control receiver.

1 | Ripple control receiver |
2 | Router/switch |
3 | Inverter with ripple control receiver, which distributes the control signals in the home network |
4 | Inverter without ripple control receiver, which uses the control signals of another ripple control receiver |
To do this, proceed as follows:
- Log into the Webserver as an installer.
- Go to Service menu > Energy management.
- The Energy management page opens.
- Select the Receipt of broadcast control signals activated function.
- Click on the Save button.
- The receipt of broadcast control signals is active.