Connecting methods between inverter/computer
1 | Inverter with LAN/WLAN interface and WLAN access point |
2 | WLAN access point connection for initial commissioning or for direct access to the inverter Webserver on site |
3 | WLAN connection via WLAN router |
4 | LAN connection via WLAN router |
5 | LAN connection via switch/hub/router |
6 | LAN direct connection (only with manual IP configuration) |
The inverter can be contacted via a computer or tablet using various types of connection to configure it or retrieve data. Several settings should be noted here. These are explained in more detail on the following pages.
INFO
If the inverter is to be accessed via the Internet, this shouldn't take place using unencrypted HTTP access (port 80).
Instead, preference should be given to encrypted access via HTTPS (port 443) and a VPN connection.
For settings relating to the router or Internet, please contact the provider of the router, your provider or a network specialist.