Wallbox status messages

The following messages may appear whilst charging electric vehicles.

Message	Meaning
No vehicle connected	No vehicle is connected to the charging unit.
Initialisation	At the start of a charging process, an initialisation takes place between the charging point and the vehicle. During this process, the charging parameters are determined between the charging point and the vehicle.
Vehicle connected, charging blocked	A vehicle is connected to the charging point. However, the parameters do not permit charging. This may be because the charging point has been locked (e.g. Lock Mode, or charging authorisation via RFID has not been granted).
Vehicle connected, awaiting prerequisite	A detected vehicle is waiting for authorisation to begin the initialisation process.
Charging is starting	The internal control system is checking whether charging can be started.
Charging	The vehicle is being charged. The current values for charging power, duration and energy charged during this charging session are displayed. You can pause charging by clicking the pause button. The charging process will remain paused until the button is pressed again.
Charging paused	The charging process has been paused but is not yet complete. A pause icon is displayed. The current charging power, duration and energy charged for this charging session are displayed. Clicking the Pause button resumes the charging process.
Charging process interrupted	The charging process has been paused due to a possible phase imbalance.
Charging complete	The car has finished charging. The duration and the energy transferred during the completed charging process are displayed.
Unable to start charging. The power consumption of the domestic connection has been exceeded.	The maximum power consumption has been exceeded (blackout protection). Charging can be started as soon as household consumption is reduced.
Charging interrupted. The power consumption of the domestic supply has exceeded the limit.	The maximum power consumption has been exceeded (blackout protection). Charging has been paused and will start automatically once domestic consumption is reduced.
Charging process completed (limit reached)	The car has finished charging in accordance with the settings configured under Settings > Activate Limit. The duration and energy transferred during the completed charging process are displayed.