Select charging mode

Lock Mode (Wallbox locked)

Charging at the wallbox is disabled. It is not possible to charge the electric vehicle. The wallbox can be unlocked by selecting a different mode.

After adding an ENECTOR G2 wallbox to the Device Manager for the first time, Lock Mode is initially active. The desired mode must be selected before the first charging session.

Power Mode (Simple Charging)

The electric vehicle is charged at the maximum charging power from all available sources (PV, mains and home battery), depending on how the wallbox is connected (single-phase or three-phase), the maximum charging power set, the phase usage selection and the charging power permitted by the electric vehicle.

Solar Pure Mode (Solar Charging)

The electric vehicle is charged solely using surplus PV power. If there is a battery in the domestic grid, this can also be used to charge the electric vehicle.

For electric vehicles charged on a single-phase supply, the charging power ranges between 1.4 and 3.7 kW. This means that charging only starts when at least 1.4 kW of surplus PV energy is available, and is paused or stopped when this falls below 1.4 kW.

Solar Plus Mode (Solar-optimised charging)

The electric car is charged using a combination of surplus PV energy and grid power.
This function is ideal for charging the electric vehicle, for example, in the evening when there is no longer enough surplus PV energy available, but the electric vehicle needs to be charged by the following morning.

Time Mode (Time-controlled charging)

The electric car is charged according to the specified time-based charging modes.
In this mode, you can specify at what time on which day of the week one of the available modes should be used.