Energy management

The energy management function allows you to specify the priority with which the devices shown here are supplied with surplus solar power. High-priority devices are supplied first.

You can use the arrow keys to move devices up or down in the priority list.

If a home battery is installed, a target state of charge (target SoC) can also be set. The battery will be charged up to this value as a priority before other loads are supplied.

If the ‘Use home battery for vehicle charging’ tick box is ticked, the battery will, for example, also be used to charge an electric vehicle from 100% up to the set SoC value.

The set value must be at least 5% above the home battery’s target SoC value set above. Otherwise, the battery would be continuously discharged and recharged.