Smart battery control
Applies to PLENTICORE G3 from software version 3.6.0 onwards
The inverter features an intelligent generation and consumption forecasting system (intelligent battery management), which, in conjunction with a connected energy storage system, ensures that the electricity generated is optimally made available to consumers within the household.
This enables the consumer to use the majority of the energy produced themselves, thereby helping to reduce electricity costs.
The intelligent battery management system recognises and takes into account the times of day when the household requires the most energy. From this, the system automatically derives forecasts of how household consumption is likely to develop in the future and regulates the charging or discharging of the battery accordingly.
This ensures that as much of the self-generated energy as possible is consumed by the household itself and that as little energy as possible is fed unused into the public electricity grid.
This function should not be used if an electric vehicle is also being charged via the domestic electricity supply. In this case, it is not possible to determine a clear consumption forecast.
With the help of the intelligent generation and consumption forecast, the use of the energy generated is optimised beyond simply storing the electricity, whilst at the same time complying with all legally prescribed power limits (e.g. the 60% EEG regulation).
Intelligent battery control should only be activated if power curtailment has been enabled on the inverter. This means that the connected PV power at the inverter must be greater than the power that the inverter feeds into the grid.
If intelligent battery control has been selected for battery usage, it is not possible to store surplus AC energy from local generation (Smart AC Link function). The function is then automatically deactivated.
Example of control without intelligent battery control
1 | Home consumption (own requirement) |
2 | Battery charge |
3 | Feed-in to the public grid |
4 | Power limitation of feed-in to e.g. 50% |
5 | Unused PV energy |
Example of control with intelligent battery control
1 | Home consumption (own requirement) |
2 | Battery charge |
3 | Feed-in to the public grid |
4 | Power limitation of feed-in to e.g. 50% |
The diagram showing control without intelligent battery control illustrates that, without such a system, the PV energy generated remains unused – particularly during periods of high solar irradiance – due, for example, to a power limitation of 50 per cent.
Thanks to the smart battery control system with its generation and consumption forecasting, the battery is only charged when the surplus energy cannot be consumed within the domestic grid or fed into the public grid. Consequently, the PV energy generated is put to good use or stored in the battery.
As a result, the consumer increases their self-consumption and level of self-sufficiency.