Initial commissioning via web browser
Initial commissioning via the web browser can be carried out using the inverter's Wifi access point or a LAN connection.
Select a connection for initial commissioning:
Selection: Wifi access point
The inverter's Wifi access point is used for the setup.
- Choose to connect via the Wifi access point for initial commissioning:
- Scan the QR code with your smartphone and connect to the inverter's Wifi access point. If this is not possible, you can establish the connection manually. To do this, use the inverter's serial number as the SSID and the inverter's article number as the password.
- The QR code for the Webserver for the initial setup wizard is displayed.
- Scan the QR code for the Webserver with your smartphone.
- The Webserver connection is established and the initial setup wizard is displayed. Continue with Setup wizard.
If the Webserver initial setup wizard does not start in the browser, enter the Wifi IP address (192.168.67.1) shown on the inverter display into a web browser on your smartphone.
Selection: LAN cable
The inverter is connected to a router in the local network via a LAN cable and automatically obtains an IP address via a DHCP server.
- The inverter's Webserver can now be accessed in a web browser using an input device (e.g. PC). To do this, enter the IP address shown on the inverter display into a web browser on your input device.
- The Webserver connection is established and the initial setup wizard is displayed. Continue with Setup wizard.