Menu overview – Settings/Information
|
Level 1 |
Level 2 |
Level 3 |
Level 4 |
|---|---|---|---|
|
Settings/Information |
Basic settings |
Language |
Select language |
|
Inverter name |
Enter name | ||
|
Date/time |
Set date/time | ||
|
Communication |
Network IPv4 |
Change IP and network parameters of the LAN interface. | |
|
DNS server setting | |||
|
Wifi settings |
Activate Wifi and select mode | ||
|
Wifi IPv4 |
Change the Wifi module's IP settings. | ||
|
Modbus SunSpec (TCP) |
Activate Modbus SunSpec protocol | ||
|
Solar portal |
Portal |
Select portal | |
|
Activate or deactivate data export | |||
|
Device information |
Article number |
Article number | |
|
Serial number |
Serial number | ||
|
Hardware |
Hardware version | ||
|
MC |
Main controller version | ||
|
IOC |
Input-output controller version | ||
|
SW |
Software version | ||
|
National guideline |
Set national guideline | ||
|
Max. grid feed-in |
Display of set limitation | ||
|
Extra options |
Release options |
Inputting an activation code, e.g. to connect a battery. | |
|
Released options |
Displays released options, which can be deactivated | ||
|
Service menu 1 |
Service code input |
Input for service code | |
|
Fan test |
Carry out a functional test on the fan | ||
|
Reset settings |
Reset device to factory settings | ||
|
Event list 2 |
Shows the last 10 events with explanation | ||
|
Energy management 3 |
Input for max. feed-in capacity (default: max. inverter power) | ||
|
Selecting the energy meter connected to the inverter and the installation position | |||
|
Reset national guideline 3 |
Reset the country setting | ||
|
Update |
System update |
Configure system update selection (automatic, manual or notification of updates) | |
|
Check for updates |
Check for new software updates and install if available. |