Menu Overview - Settings/information
Level 1 | Level 2 | Level 3 | Level 4 |
|---|---|---|---|
Settings/Information | Basic settings | Language | Select language |
Inverter name | Enter name | ||
Date/time | Set date/time | ||
Communication | Network IPv4 | Change IP and network parameters of the LAN interface. | |
DNS server setting | |||
Wifi settings | Activate Wifi and select mode | ||
Wifi IPv4 | Change the Wifi module's IP settings. | ||
Modbus SunSpec (TCP) | Activate Modbus SunSpec protocol | ||
Solar portal | Portal | Select portal | |
Activate or deactivate data export | |||
Device information | Article number | Article number | |
Serial number | Serial number | ||
Hardware | Hardware version | ||
MC | Main controller version | ||
IOC | Input-output controller version | ||
SW | Software version | ||
National guideline | Set national guideline | ||
Max. grid feed-in | Display of set limitation | ||
Extra options | Release options | Inputting an activation code, e.g. to connect a battery. | |
Released options | Displays released options, which can be deactivated | ||
Service menu 1 | Service code input | Input for service code | |
Fan test | Carry out a functional test on the fan | ||
Reset settings | Reset device to factory settings | ||
Event list 2 | Shows the last 10 events with explanation | ||
Energy management | Input for max. feed-in capacity (default: max. inverter power) | ||
Select the energy meter connected to the inverter and the installation position 3 | |||
Reset national guideline 3 | Reset the country setting | ||
Update | System update | Configure system update selection (automatic, manual or notification of updates) | |
Check for updates | Check for new software updates and install if available. |