When working on the DC feed cables
DANGER
Risk of death due to electrical shock and discharge
During operation, high voltages are present on the live parts and cables inside the product. Touching live parts or cables will result in death or life-threatening injuries from electrical shock.
- Before opening the device, de-energise it and secure it against being switched on again.
When working on the DC feed cables, the inverter must be completely de-energised.
It is absolutely essential that these steps are taken in addition to those stated previously:
- If present, switch off the connected battery storage.
INFO
A detailed description of how to switch off the battery storage is available in the operating manual provided by the battery manufacturer.
- Disconnect all DC connections on the inverter. To do this, unlock the engaging clips with a screwdriver and disconnect the plug.
INFO
Information on the SUNCLIX mounting instructions can be found at: www.phoenixcontact.com.
- Ensure that all connections are voltage-free.
- The inverter is now completely voltage-free. Work on the inverter or on the DC feed cables can now be carried out.