Activating active power control

  1. Connect inverter and computer. Connecting the inverter/computer
  2. Launch an Internet browser.
  3. In the address bar of the browser, enter the IP address of the inverter to which the ripple control receiver is connected and confirm with Return.

  4. INFO

    Info

    The IP address can be read on the inverter's display.

  5. The Webserver page is opened.
  6. Log into the Webserver as an installer
  7. Go to Service menu > Digital inputs.
  8. The Digital inputs page opens.
  9. Select the "Active power control" function.
  10. If the control signals of this ripple control receiver are to be distributed in the local LAN network (home network) by means of UDP, select Activate the distribution of ripple control signals. Other inverters can therefore also be controlled using the connected ripple control receiver in the local LAN network.
  11. Click on the Save button.
  1. Active power control is enabled.