"Service – general" menu
| Level 1 | Level 2 | Level 3 |
|---|---|---|---|
| Service menu | Energy management 5 | Select the installed energy meter and the installation position. Set the limitation of the feed-in capacity (configurable without service code). Activate the function for receiving control signals from a ripple control receiver. |
Generator settings | Activate shadow management per MPP input or use of external module controls. | ||
Battery settings | Select battery type, battery control, battery use from a certain power level, activate intelligent battery control and time-controlled battery use. Activate the storage of excess AC energy from local generation, located in the same house grid, in a connected battery. | ||
External hardware settings | Set compatibility with residual current devices/RCD type A circuit breakers. | ||
Digital inputs 5 | Set function of digital inputs (e.g. operating mode of ripple control receiver and activate function for forwarding of control signals or for external battery control). | ||
CEI inputs | Activate the CEI input (terminal X403). The switchable shutdown limits must be configured under "Grid and system protection". | ||
Switched output | Set the functions of the 4 switched outputs (e.g. for load control, for a heat pump with SG Ready label, events). | ||
Extra option | Release extra option via activation code (e.g. battery use on DC3). |
