Connecting communication

1

Smart Communication Board

2

LAN connection (RJ45 Ethernet)

3

Sealing ring

4

Union nut

5

Ethernet cable

6

Computer (for configuration or data retrieval)

  1. De-energise the inverter's terminal compartment.

  2. DANGER

    danger

    Risk of death due to electrical shock and discharge!

    De-energise device and secure against being switched on again. De-energising the inverter

  3. Insert Ethernet cable into the inverter and seal with sealing ring and union nut. Tighten union nut to the prescribed torque. Torque: 8 Nm (M25).

  4. INFO

    Info

    For connection with a computer or computer network (Ethernet 10BaseT, 10/100 Mbit/s), an Ethernet cable of category 5 (Cat 5e, FTP) or better with a max. length of 100 m is to be used.

  5. Connect Ethernet cable to LAN interface of Smart Communication Board.
  6. Connect the Ethernet cable to the computer or router.
  1. The inverter is connected to the internal network.