Activate receipt of control signals for active power control

If a ripple control receiver is already connected to another KOSTAL solar inverter in the home network, it is possible to use the control signals from this ripple control receiver.

1

Ripple control receiver

2

Router/switch

3

Inverter with ripple control receiver, which distributes the control signals in the house network

4

Inverter without ripple control receiver, which uses the control signals of another ripple control receiver

To do this, carry out the following steps:

  1. Log in to the web server as an installer.
  2. Select the menu item Service > General > Grid connection .
  3. Select the function Receive broadcast control signals activated.
  4. Click on the Save button.
  1. Broadcast control signal reception is now active.