Electrical connection

The wallbox may be connected to a TN / TT grid.

DANGER

danger

Risk of death due to electrical shock and discharge!

De-energise device and secure against being switched on again.

  1. Strip the supply cable.
  2. Strip 10 mm of insulation from the wires.
  3. Connect the wires to the terminals according to the terminal labelling.
    Three-phase operation: Use terminals L1, L2, L3, N and PE.
    Single-phase operation: Use terminals L1, N and PE.
    Observe the connection data for the terminal strip Technical data.
  4. Check that the individual wires are connected correctly and that the screws are tightened securely.
  1. Supply cable connected.