Procedure for initial commissioning
INFO
The installation process may vary depending upon the software version of the inverter.
Information about the menus: KOSTAL PIKO CI app - menu structure
- In the app, select the Settings page.
- On the Settings page, the app shows you various menus where you can configure settings.
- In order to have access to all relevant settings, go to the User Management menu item and then select Change user.
- Enter the password superadmin and select Log in as installer.
INFO
The default password for the installer is superadmin.
With this user, a variety of settings can be configured vis-à-vis the system operator, such as network settings, power limitations or grid guidelines.
This password should be changed after the initial commissioning.
- Configure the settings for inverter operation and on the Settings page, select Inverter settings.
INFO
Observe national regulations! In France, in particular, the inverter and the supply lines must be labelled, for example.
The installer is responsible for obtaining and affixing the prescribed markings.
- The inverter is in operation and can now be used. Initial commissioning is completed.
The following settings still need to be configured after initial commissioning:
- Inverter settings made by the installer
- Prescribed settings for grid feed-in by the energy supply company
- Change the password or update the inverter software.